LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> X1 sDrive28i >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine - Repair (F48 AWD)) >> 11 65 Turbocharger >> 11 65 310 Remove and install or replace the blow-off valve (production date beginning 07/2019) >> Install blow-off valve

Install blow-off valve

WARNING: This page is about a different variant/trim than selected.

Check the seal (1) for damage and renew the blow-off valve (2) where required.

G14256654Courtesy of BMW OF NORTH AMERICA, INC.

Insert and install the blow-off valve (2).

Tighten screws (arrows). Tightening torque: 10Nm

Connect and lock the connector (1).

Make sure the connector (1) engages audibly.

G00574266Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work: 

scientia non olet · About LEMON Manuals