LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> X1 sDrive28i >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Rear Axle - Tightening Torques (F48 AWD)) >> Wheel Bearings >> 33 41 Wheel Bearings

33 41 Wheel Bearings

WARNING: This page is about a different variant/trim than selected.
33 41 WHEEL BEARINGS - TIGHTENING TORQUES SPECIFICATION

  Type Thread Tightening specifications Dimension
1AZ Wheel bearing to trailing arm F39/F45/F46/F48/F49/F52 M12 Jointing torque and angle of rotation must be observed without fail.
Replace screws.
Jointing torque
Angle of rotation		 100 Nm
90°
2AZ Wheel bearing (hub) on output shaft F39 AWD/F45 AWD/F46 AWD/F48 AWD/F49 AWD M16 Jointing torque and angle of rotation must be observed without fail.
Replace screw.
Jointing torque
Angle of rotation		 210 Nm
90°
scientia non olet · About LEMON Manuals