00 02 000 Raising vehicle with trolley jack

WARNING: This page is about a different car, the 2022 BMW X1 and 2021 BMW X1. However, it is still accessible from the selected car via links, so may be relevant.

Observe the following trolley-jack-related notes:

Only trolley jacks sold or approved by BMW, with a rubber plate on their mounting, may be used!
Trolley jacks must be regularly serviced and always checked for functional reliability before they are used!
Check the rubber plate on the trolley jack prior to each use, replacing if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.

WARNING: The vehicle may be raised with a trolley jack only at the following mounting point!

Center of front axle support
NOTE: Risk of damage!
Align the rubber plate on the trolley jack with the front axle support so as to prevent contact with and therefore damage to the underbody protection.

Courtesy of BMW OF NORTH AMERICA, INC.
Cross-member/bridge screw connection, rear axle support