00 00 009 Pre-delivery check

WARNING: This page is about a different car, the 2022 BMW X1 and 2021 BMW X1. However, it is still accessible from the selected car via links, so may be relevant.

Quality assurance by BMW Service

Model:

Vehicle identification number:

(Please tick where appropriate)

If necessary Quick Reference Guide:

Discussed and handed over

Included with the vehicle:

Owner's Handbook(s)

Maintenance record booklet (with national-market version Korea only)

Vehicle key/remote key

If necessary - spare key

The vehicle document case is left in vehicle the vehicle:

Glove box

Storage box

Luggage compartment

I hereby confirm that I have received the vehicle in perfect condition.

.................................

Place and date

.................................

Signature of vehicle owner

Pre-delivery check by BMW Service

Scopes of inspection:

To be kept with the workshop documents

The following work must be carried out on the vehicle by BMW Service prior to delivery.

Model: _______________________________

Vehicle identification number: ___________________________

* Denotes optional extra or national-market version. Observe possible changes in this regard.

Scopes of inspection: to be kept with the vehicle documents
Accessory items	OK	Not OK	not present
Install other accessory items
Using BMW Group diagnosis system	OK	Not OK	not present
Carry out "CBS pre-delivery check" in the Service Function path under Maintenance
Deactivate transportation mode
Perform the following additional work only with SA5GB: Activating stolen vehicle tracking*
Reset average mileage/kilometers driven
Enter first registration
Set on-board date
Set statutory inspection dates*
Enter service telephone numbers
BMW TeleServices*: Activate
Navigation system*: Activate the roadmap. Check the up-to-dateness of the roadmap and update if necessary.
Check battery, observe notes in the diagnosis system, if applicable, charge battery
Delete fault memory
Carry out vehicle test, eliminate faults if necessary
Engine compartment	OK	Not OK	not present
Check for cleanliness
NOTE: It is possible that the cooling system has been filled above the maximum mark ex works. Do not adjust the coolant level. The normal coolant level is reached while driving the vehicle.
Fluid tank for washer fluid	OK	Not OK	not present
Check fluid level and top up if necessary, where required with antifreeze additive
Labels	OK	Not OK	not present
Apply label for BMW Group Mobile Service
Body, interior equipment, vehicle underbody	OK	Not OK	not present
Check for transportation damage
Spring blocker*	OK	Not OK	not present
Remove
Tires	OK	Not OK	not present
Checking Tire pressure Observe the information on tolerance compensation for RDC.
Initialize Run Flat Indicator (RPA) or Tire pressure control (RDC)
For winter tires* attach the label V-max.
Maintenance record booklet* (with national-market version Korea only)	OK	Not OK	not present
Stamp pre-delivery check/enter vehicle identification number
Attach documentation (glove box/storage box/luggage compartment)	OK	Not OK	not present
Rider's Manual
Maintenance record booklet (with national-market version Korea only)
Contact booklet
BMW Group Mobile Service brochure
Include key/remote control (make note of number)
Indicator/warning lights and Check Control	OK	Not OK	not present
Check and remove fault if applicable
Service and parking brake	OK	Not OK	not present
Transport and immobilization periods of 3-6 weeks: Check for correct operation
In event of transportation and immobilization periods of more than 6 weeks: Brake in
Interior mirror with digital compass*	OK	Not OK	not present
Calibrate system
Transportation lock* and vehicle cleaning	OK	Not OK	not present
Remove the TRANSPORTATION PROTECTIVE FILM
Clean inside and outside of vehicle
Notes:

......................

Date

......................

Mechanic

......................

Workshop Supervisor