Steering, Measurement: Notes
STEERING, MEASUREMENT - TECHNICAL DATA SPECIFICATIONS
| Ride height with vehicle load tolerance | ||
| Minimum value | min. - 20 mm | |
| Maximum value | max. + 40 mm | |
| Tolerance for ride height at design level | ||
| Tolerance for setpoint value | max. 2 mm | |
| Difference between left and right | max. 2 mm | |
| Tolerance for ride height in normal position | ||
| Tolerance for setpoint value | max. 10 mm | |
| Difference between left and right | max. 10 mm | |