Removing the fanfare horn on the left
Preliminary work
- Refer to REMOVING THE FRONT LOWERING WHEEL ARCH COVER .
- Refer to DETACHING AUXILIARY COOLANT PUMP (VERSION WITH STATIONARY HEATING SYSTEM) :
NOTE:
TECHNICAL INFORMATION
Only replace the fanfare horn complete with the holder.
Only replace the fanfare horn complete with the holder.
- Equipment specification with radiator:
Loosen screw (1).
Feed out air duct (2).
- Unlock and disconnect connector (1).
- Drill out a blind rivet (2) with a suitable drill (e.g. 8 mm).
- Remove the fanfare horn with the holder (3).