Install both tail lights in the trunk lid
NOTE:
Description is for left component only. Procedure on the right side is identical.
Install the tail light on the trunk lid on the left
- Check the snap-in lug (1) on the tail light (3) for damage, replace if applicable.
- Replace the seal (2)
.
Parts: Gasket
- Build level from 03/19:
Check the snap-in lug (1) on the tail light (3) for damage, replace if applicable.
Replace seal (2) .
Parts: Gasket
- Position the tail light in the tailgate in such a way that the retaining lugs (3) snap in.
- Tighten nuts (2) .
TIGHTENING TORQUE SPECIFICATIONS
| Tail light at trunk lid | |
|---|---|
| Nut M6 | 2.6 Nm |
- Connect connectors (1) and lock.