Screw the transmission bearing support tight (all-wheel drive vehicle)

• Tighten the screws (1)  on the transmission bearing support (2)  .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Transmission bearing support to body
  M8	tightening torque	19 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install the retaining plates.
• Install the nuts (1)  and (2)  and tighten.

TIGHTENING TORQUES SPECIFICATION

Retaining plates for vehicle underbody cover
Sheet metal nut/plastic nut Replace nuts.	tightening torque	3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.