Prepare the mobile table lift
Mobile table lift
- Stage the mobile table lift 2 184 136
- Place the mounting element from the set of special tools 2 305 379
ready.
- Position the mounting elements (1) with the mountings (50) on the work surface (A) of the mobile lifting table for the front subframe at the coordinates 7/1 and 7/8 .
- Position the mounting elements (2) with the mounts (80) on the work surface (A) of the mobile lifting table for the front subframe at the coordinates 2/2 and 2/7 .
- Position the swivel bearing stand (3)
on the work surface (A)
of mobile lifting table at the coordinates 3/1
and 4/8
.
- Position the mounting elements (1) with the mounts (60) on the work surface (B) of the mobile lifting table for the front axle support at the coordinates 1/3 and 3/7 .
- Position the mounting element (2)
with the mount (80)
on the work surface (B)
of the mobile lifting table for the transmission at the coordinates 5/4
.
- Adjust the inclination of the lifting table (1) with the adjustment screw (2) until the bubble level of the lifting table (1) displays the correct position.