Installing the right reinforcement strut

NOTE: Description is for left component only. Procedure on the right side is identical.

• Position the reinforcement strut (1)  .
• Screw in the screw (2)  by hand force.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1)  .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Engine mount reinforcement strut on body
  M8	tightening torque	28 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screw (2)  at the reinforcement strut (1)  .

TIGHTENING TORQUES SPECIFICATION

Engine mount reinforcement strut on front subframe
M8	tightening torque	28 Nm

Courtesy of BMW OF NORTH AMERICA, INC.