If installed on left: Install spray guard

• Position spray guard (2)  on front axle support.
• Position screws (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1)  .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Splash guard on front axle support
  M6	tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten screws (1)  of spray guard (2)  .

TIGHTENING TORQUES SPECIFICATION

Splash guard on front axle support
M6	tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.