Securing the oil sump acoustic cover

CAUTION: Improper routing of the positive battery cable.
Risk of short circuits!

Feed in and install the acoustic cover (3) of the oil pan.
Secure clamps (1) .
Connect and lock the clamp (2) .
The clamp (2) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert and install cable (3) .
Connect and lock the clamp (2) .
Connect and lock the clamp (1) .
All clamps must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert and install cable (1) .
Connect and lock the clamps (arrows).
All clamps must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect cable (1) to the starter motor.

Tighten nut (2) .

TIGHTENING TORQUE SPECIFICATIONS

Terminal 50 to starter motor
M6	Tightening torque	7 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Feed the positive battery cable (3) in on the starter and install.
Install the anti-twist lock (4) of the positive battery cable to the starter motor up to the stop (5) .

Tighten nut (6) .

TIGHTENING TORQUE SPECIFICATIONS

Battery positive lead to starter
M8	Tightening torque	13.5 Nm