Fastening the coolant feed line for the exhaust turbocharger on the right
- Position the coolant feed line.
- If necessary, replace clamp (3).
Parts: cl
- Fasten clamp (3) .
- Tighten down screw (1)
.TIGHTENING TORQUE SPECIFICATIONS
Coolant feed line to cylinder head cover M6x16 Tightening torque 8 Nm - Tighten down screw (2)
.TIGHTENING TORQUE SPECIFICATIONS
Coolant feed line to cylinder head cover M6x16 Tightening torque 8 Nm