Removing the turbocharger (cylinder head removed)

• Secure turbocharger against falling down.
• Loosen screws in the order (5)  to (1)  .

NOTE: TECHNICAL INFORMATION 
Exhaust manifold/turbocharger is not bolted to the underside, but clamped instead. When removing/replacing the exhaust manifold/turbocharger, the trim strip remains screwed on.

• Do not release the trim strip (6)  .
  Fig 1: Turbocharger Screws Loosening Sequence

  Courtesy of BMW OF NORTH AMERICA, INC.
• Remove the shifting strip (1)  and take the turbocharger off the cylinder head.

Courtesy of BMW OF NORTH AMERICA, INC.