Screw in special tools 11 9 8951 to 6 and 7 to 12

Preliminary work 

• Refer to CHECKING CAMSHAFT TIMING .
• Refer to PLACE THE 1ST AND 7TH CYLINDER INTO THE TDC SETTING .
• Refer to INSTALLING SPECIAL TOOL FOR FASTENING CAMSHAFTS .
• Refer to LOOSENING BOTH CENTRAL BOLTS OF VANOS GEAR .

• Screw the special tools 0 496 359 (11 9 890)  into the cylinder head at 10 Nm.

  Courtesy of BMW OF NORTH AMERICA, INC.