Checking the expanding foam tape on the dashboard
Check
- Check expanding foam tape (1) for damage.
Result
» The expanding foam tape (1) is damaged.
Measure
- Replace the expanding foam tape (1) .
Parts: Expanding foam tape
Replace the expanding foam tape on the dashboard
Removing the expanding foam tape on the dashboard
NOTE:
TECHNICAL INFORMATION
Notes on component bonding using adhesive tape form the basis for these repair instructions and must be observed without fail.
For additional information see: NOTES ON COMPONENT BONDING WITH ADHESIVE TAPE
Notes on component bonding using adhesive tape form the basis for these repair instructions and must be observed without fail.
For additional information see: NOTES ON COMPONENT BONDING WITH ADHESIVE TAPE
- Loosen expanding foam tape (1) from the dash panel.
Install the expanding foam tape on the dashboard
NOTE:
TECHNICAL INFORMATION
Notes on component bonding using adhesive tape form the basis for these repair instructions and must be observed without fail.
For additional information see: NOTES ON COMPONENT BONDING WITH ADHESIVE TAPE
Notes on component bonding using adhesive tape form the basis for these repair instructions and must be observed without fail.
For additional information see: NOTES ON COMPONENT BONDING WITH ADHESIVE TAPE
- Clean adhesive area of the expanding foam tape (1) .
- Replace the expanding foam tape (1)
.
Parts: Expanding foam tape
- Stick expanding foam tape (1) parallel to trim (2) on the instrument panel.