Installing The Engine Compartment Lid Left Hinge
- Position the engine compartment lid hinge (1) as per the available screw marks.
- Tighten down screws (2)
.
TIGHTENING TORQUE SPECIFICATIONS
Engine compartment lid hinge to body screw Tightening torque 28 Nm - Clip in the cable bracket (3) .
Follow-up work
- Refer to INSTALL THE ACTUATOR ON THE LEFT HOOD HINGE .
- Refer to INSTALLING WINDSHIELD PANEL COVER .
- Refer to INSTALL LEFT AND RIGHT WIPER ARM .
- Refer to INSTALL THE REAR RIGHT ENGINE COMPARTMENT COVER .
- Refer to INSTALL THE COVER OF THE ENGINE COMPARTMENT ON THE REAR LEFT .
- Refer to INSTALLING THE GAS PRESSURE SPRING FOR HOOD .
- Refer to INSTALL HOOD .
- Refer to CHECK THE GAP DIMENSION OF THE HOOD .
- Refer to INSTALLING THE NOZZLE CHAIN .
- Refer to DISCONNECTING ALL BATTERY GROUND LEADS .