New Parts Required
Precondition
- Vehicle is fixed on straightening bench.
NOTE:
TECHNICAL INFORMATION
- Observe the procedure for repair stage 3.
For additional information see: 41 00... Repair method for repair stage 3
- For information about stripping and rebuilding operations, refer to the surrounding text in the AIR. See the FRU number.
Preliminary work
Follow-up work
- Prepare the following new parts (see Electronic Parts Catalog [EPC]):
A-pillar, outer part (1)
Side frame, center (2)
Reinforcement plate, door sill (3)
NOTE: TECHNICAL INFORMATION
For additional information see: 41 00... Overview of consumables in Electronic Parts Catalog - Following consumables are required:
| Material | Quantity |
|---|---|
| Adhesive K1 | 1 |
| Adhesive K2 | 1 |
| Cleaning agent R1 | 1 |
| Cleaning agent R2 | 1 |
| T-bolt | 5 |
| Cavity sealing wax remover | |
| Sealant D1 |