Supplying The New Parts Required
NOTE:
TECHNICAL INFORMATION
- Observe the procedure for repair stage 3.
For additional information see: 41 00... Repair method for repair stage 3
- For information about stripping and rebuilding operations, refer to the surrounding text in the AIR. See the FRU number.
Preliminary work
Follow-up work
- The following new parts are required (see Electronic Parts Catalog):
Carrier support, wheel arch, front (1)
Inner wheel arch section carrier support (2)
screw connection of front panel (3)
NOTE: TECHNICAL INFORMATION
For additional information see: 41 00... Overview of consumables in Electronic Parts Catalog - Following consumables are required:
| Material | Quantity |
|---|---|
| Adhesive K1 | 1 |
| Blind rivet N1 | 30 |
| EMC screw | 1 |
| Coarse thread bolt | 5 |
| Cavity foam HS3 | 1 |
| Cleaning agent R1 | 1 |
| Cleaning agent R2 | 1 |
| Sealing compound D1 | 1 |
| Cavity protection wax remover | 1 |