Installing window frame trim of rear door

• While installing, note that the side window glass (2)  is correctly inserted in the window frame trim (1)  .
• Ensure that the window frame trim is inserted in the foam block (3)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Press window frame trim (1)  lightly to the front and feed in downwards.
• Tighten down screws (2)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Window frame trim to window frame
  screw	Tightening torque	2.4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mount the rubber window seal (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mount the rubber window seal (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to PARTIALLY INSTALLING THE FRAME TRIM ON THE WINDOW FRAME OF THE REAR DOOR .