Install the Soft-close motor
- Attach the Bowden cable (1)
from the Automatic Soft Close drive (3)
on the door lock (2)
.
- Install cover (1) and engage the clips (2) .
Follow-up work
- Refer to INSTALLING DOOR LOCK .
- Refer to INSTALLING THE FRONT OUTSIDE DOOR HANDLE .
- Refer to INSTALLING THE MODULE BRACKET ON THE FRONT OF THE DOOR (PART INSTALLATION) .
- Refer to INSTALLING FRONT DOOR WINDOW GLASS .
- Refer to INSTALLING FRONT DOOR TRIM PANEL .
- Refer to INSTALLING THE DECORATIVE STRIP ON THE DOOR TRIM PANEL .
- Refer to INSTALLING THE MIRROR TRIANGLE COVER .
- Refer to INSTALLING THE WEATHER STRIP ON THE FRONT DOOR .
- Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .