Installing both sport leather steering wheel switches

• Position the switch (2)  on the design trim and tighten with screws (1)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  MFL switch
  Screw TS5x12	tightening torque	1.5 Nm

• Repeat operation on the right-hand side.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE DECORATIVE TRIM FOR THE LEATHER SPORTS STEERING WHEEL (SA255) .
• Refer to IF INSTALLED: INSTALLING THE SHIFT PADDLE FOR THE AUTOMATIC TRANSMISSION .
• Refer to INSTALLING THE AIRBAG UNIT OF THE STEERING WHEEL OR SPORTS STEERING WHEEL .