61 67 100 Removing and installing/replacing left high-pressure nozzle of headlight cleaning system
Special tools required:
Necessary preliminary tasks:
- Remove front bumper panel. See 51 11 156 REMOVING AND INSTALLING (REPLACING) FRONT BUMPER PANEL .
To prevent excess escape of washer fluid, seal off end of high pressure line with special tool. 13 3 010
Unlock high pressure line (1) and detach from high-pressure nozzle (2).
Unlock high-pressure nozzle (1) and remove in direction of arrow rearwards.
Installation note:
Ensure guide (1) is correctly seated.
New washer jets are already preset.
Top up washer fluid.
Carry out function check.