65 13 060 Removing and installing/replacing speaker (midrange speaker, in instrument panel)

Special tools required:

Unclip trim (1) with special tool 00 9 327 from latch mechanisms and remove upwards.

Fig 1: Removing Trim Using Special Tool 00 9 327 From Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Clamps and guides on marked points must not be damaged.

Fig 2: Locating Clamps And Guides

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 65 13 5AZ .

Installation note:

To tighten screws, use special tool 00 9 460 .

Remove midrange speaker (2) from dashboard (3).

Disconnect plug connection underneath.

Remove midrange speaker (2).

Fig 3: Removing Mid-Range Speaker From Dashboard

Courtesy of BMW OF NORTH AMERICA, INC.