11 22 510 Removing and installing/replacing flywheel (transmission removed - N63O1)
Special tools required:
Necessary preliminary tasks:
- Remove automatic transmission. See applicable procedure for drivetrain configuration: 24 00 034 REMOVING AND INSTALLING AUTOMATIC TRANSMISSION (GA8HP70Z) N63 or 24 00 034 REMOVING AND INSTALLING AUTOMATIC TRANSMISSION (GA8HP70Z) N63 AWD .
- Remove manual transmission. See 23 00 018 REMOVING AND INSTALLING TRANSMISSION (GS6-53BZ) (N63) .
- Remove clutch. See 21 21 500 REMOVING AND INSTALLING OR REPLACING CLUTCH (SAC 240) .
Manual transmission:
Secure flywheel (1) with special tool 11 9 260 .
Illustration S63T0.
Automatic transmission:
Release flywheel screws in area (1).
Remove flywheel (2).
Installation note:
Clean thread of flywheel bolts in crankshaft.
Flywheel (2) is secured with an alignment pin.
Fit flywheel (2).
Fit new flywheel screws.
Tightening torque 11 22 1AZ .
Manual transmission:
Release flywheel screws in area (1).
Remove flywheel (2).
Installation note:
Clean thread of flywheel bolts in crankshaft.
Flywheel (2) is secured with an alignment pin.
Fit flywheel (2).
Fit new flywheel screws.
Tightening torque 11 22 1AZ .
Reassemble the vehicle.