62 11 280 Removing and installing/replacing instrument panel
Special tools required:
- 64 1 030
IMPORTANT:
Read and comply with notes on protection against electrostatic damage (ESD PROTECTION
).
Necessary preliminary tasks:
- Disconnect BATTERY EARTH LEAD
- Move steering column completely rearwards
- If necessary, tape off cover to protect against damage
Insert special tool 64 1 030 in each case in second slot, on left and right, of instrument cluster (2).
Feed special tool 64 1 030 into clamp (1) and pull downward.
Feed out instrument cluster (2) in direction of arrow.
Disconnect plug connection (1) and remove instrument panel (2).
Installation note:
Retaining tabs (1) of dashboard (2) must be exactly seated in mountings of dashboard.
Replacement:
Carry out VEHICLE PROGRAMMING/ENCODING .
Check values for Condition Based Service (CBS) and correct if necessary.
If necessary, adjust HEAD-UP DISPLAY .