63 11 570 Removing and installing/replacing the left LED technology headlight driver module

Necessary preliminary tasks:

Release screws (1).

Tightening torque 63 11 2AZ .

Fig 1: Identifying Headlight Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Pull headlight driver module (2) out of the headlight.

Unlock plug connections (1) and disconnect.

Fig 2: Identifying Headlight Driver Module Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Gasket (1) must not be damaged and must be installed free from grease.

Latch mechanisms (2) must not be damaged or missing.

Fig 3: Identifying Latch Mechanisms And Gasket

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Teach in headlight driver module (1) via vehicle diagnosis.