LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Equipment - Repair - F12 >> Trunk Latch, Locks >> 51 24 300 Removing and installing or replacing left or right gas pressure spring for tailgate

51 24 300 Removing and installing or replacing left or right gas pressure spring for tailgate

WARNING: Danger of injury!
When removing both gas pressure springs, support tailgate in fully open position with suitable apparatus.

Open tailgate.

NOTE: Make a written record of the alignment of gas strut (2) before removing.

Slide retaining spring (1) to end of gas pressure spring (2) and lever out gas pressure spring (2).

Repeat the process at the other end of the gas pressure spring (2) and remove.

Fig 1: Removing/Installing Gas Pressure Spring
G10046337Courtesy of BMW OF NORTH AMERICA, INC.