54 62 Roll Bar, Extendable
54 62 ROLL-OVER PROTECTION SYSTEM - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Rollover protection system to body | F23/F33/F83 | M10x95 | Replace screws | |
| Jointing torque | 50 Nm | |||
| Angle of rotation | 180 ±20° | |||
| F23 | M12x1.5x115 | Replace screws | ||
| Jointing torque | 68 Nm | |||
| Angle of rotation | 120 ±15° | |||
| F33/F83 | M12x1.5x115 | Replace screws | ||
| Jointing torque | 96 Nm | |||
| Angle of rotation | 120 ±15° | |||
| 2AZ Holder, ornamental grille to rollover protection system | F33/F83 | M6x16 | 8 Nm | |
| 3AZ Lock, wind deflector to rollover protection system | F33/F83 | 4 Nm | ||
| 4AZ Striker to rollover protection system | F33/F83 | 9 Nm | ||