6121 Battery With Holder
61 21 BATTERY WITH TERMINAL (P L7) - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Battery cable, positive terminal, battery cable, negative terminal, SBK, IBS (Screw connection from top) Cable shoe to high-current relay |
F2x/F3x/F8x | M6 | 5 Nm | |
| 2AZ Power distribution box, body | F2x/F3x/F8x | 2.6 Nm | ||
| 3AZ Distribution box to battery | M6 | 8 Nm | ||
| 4AZ Battery cable, positive terminal on distributor Positive terminal of battery cable to transfer terminal point Positive battery cable to jump start terminal point |
F2x/F3x/F8x | M8 | 15 Nm | |
| 5AZ Mounting, battery holder | F2x/F3x/F8x | nut M6 | 6 Nm | |
| M8 screw | 8 Nm | |||
| 6AZ Negative battery cable to body | F2x/F3x/F8x | M8 | 15 Nm | |
| 7AZ Positive battery cable of sub floor to bolt of separation wall seal | F2x/F3x | M6 | 8 Nm |