13 71 042 Removing top rear intake air duct (S55)

Necessary preliminary work: 

• Remove CARBON STRUT .
• Remove right-hand INTAKE SILENCER HOUSING 
• Remove TOP IGNITION COIL COVER .

Removal: 

Release clamp (1) and remove air duct.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Install air duct and tighten clamp (1).

Tightening torque: 13 71 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Necessary preliminary work: 

• Install TOP IGNITION COIL COVER .
• Install right INTAKE FILTER HOUSING .
• Install CARBON STRUT .