51 47 030 Removing and installing/replacing rear (inside) left or right door sill cover strip

Special tools required: 

• 00 9 317

Necessary preliminary tasks: 

• Release REAR SEAT

Release expansion rivet (1).

Release clips (2) on door sill cover strip (3) with special tool 00 9 317.

Pull door sill cover strip (3) up and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Replace faulty clips (1).

Fit door sill cover strip (2) with pre-installed clips (1).

Courtesy of BMW OF NORTH AMERICA, INC.