51 23 100 Removing and installing/replacing right engine compartment lid lock

Removal: 

Release the screws (1) and feed out the engine compartment lock (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip the grommet (1).

Detach the Bowden cable (2) from the engine compartment lock (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Attach the Bowden cable (2) to the engine compartment lock (3).

Clip in the grommet (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Feed in the engine compartment lock (2) and tighten the screws (1).

Tightening torque: 51 23 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.