51 21 330 Removing and installing/replacing weatherstrip on inner front door

Special tools required:

Necessary preliminary work:

Release screws (1).

Tightening torque: 51 41 1 AZ .

Mask front door in working area of special tool 00 9 325 with plastic adhesive tape.

IMPORTANT: Slide in special tool 00 9 325 between door trim panel and door and fit directly on clip mounting.

Detach door trim panel with special tool 00 9 325 in area A-pillar/mirror triangle starting at clips (2).

Pull off door trim panel from clamps (3).

Pull out weatherstrip (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Courtesy of BMW OF NORTH AMERICA, INC.