5175 Underbody Panelling
5175 Tightening torque overview
51 75 UNDERBODY PANELLING - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Underbody panelling on body | F-series | Bolt, non-metric thread | 3 Nm | |
| Screw M6 | 8.8 Nm | |||
| Nut | 2.5 Nm | |||
| 2AZ Wheel arch cover to body | F-series | Screw | 3 Nm | |
| Nut | 2.6 Nm | |||
| 3AZ Underbody protection front | F18 National-market version | M8x33 | Replace screw | 28 Nm |
| M10x35 | Replace screw | 28 Nm |
UNDERBODY PANELLING ON BODY - TIGHTENING TORQUE SPECIFICATION
| Underbody panelling on body | Screw not metric thread | 3 Nm |
| Screw M6 | 8.8 Nm | |
| Nut | 2.5 Nm |