41 14 020 Stripping operations - Replacing front left wheel arch
NOTE:
Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.
The following list basically represents the removal sequence.
- Disconnect battery earth lead
- Remove bumper trim
- Remove front underbody protection assembly
- Remove coolant expansion tank
- Remove intake silencer housing
- Remove front panel
- Remove radiator
- Remove front wheel arch cover (front section)
- Remove front wheel arch cover (rear section)
- Remove panel for cover on left side member
- Remove front side panel left
- Remove trailing link on left spring strut dome
- Remove engine compartment lid
- Remove left hinge for engine compartment lid
- Remove left front door
- Remove left partition wall for units compartment
- Remove DSC hydraulic unit
- Remove tandem brake master cylinder
- Remove brake booster
- Remove left trailing link
- Remove left wishbone
- Remove front left spring strut complete
- Release left wiring harness