41 11 201 Stripping operations - replacing carrier support in front of left wheel arch

NOTE: Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.

Disconnect battery earth lead
Remove bumper trim
Remove intake silencer housing
Remove coolant expansion tank
Remove front underbody protection assembly
Remove center front panel
Remove deformation element for front left bumper panel
Release line for air conditioning on capacitor
Remove left wishbone
Detach trim panel for cover on side member
Remove front wheel arch cover (front section)
Remove front side panel
Partially release left wiring harness