41 14 030 Stripping Operations - Replacing Front Right Wheel Arch

NOTE: Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.

Disconnect battery earth lead
Remove bumper trim
Remove front underbody protection assembly
Remove intake silencer housing
Remove front panel
Remove radiator
Remove power distribution module
Remove front wheel arch cover (front section)
Remove front wheel arch cover (rear section)
Remove trim panel for cover on right side member
Remove front right side wall
Remove trailing link on right spring strut dome
Remove engine compartment lid
Remove right hinge for engine compartment lid
Remove right front door
Remove right partition wall for units compartment
Release right wiring harness
Remove right trailing link
Remove right wishbone
Remove front right spring strut complete