REP-TAT-P-5133-02 Installing the power windows

Follow-up work 

• Install sound insulation on front door
• Install the front door trim panel on left or right
• Install switch trim on the front left or right front door trim panel
• Fasten front left or right door handle cover
• Perform functional check of the power window

• Guide the power window regulator (4) in and tighten the nuts (3).

  Tightening torque, Power window on door: 9.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure the Bowden cable in the area (2) on cable clip.
• Connect connector (1).
• Remove adhesive tape (2) from the door window glass (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Press door window glass (1) down into latch mechanism on the sliding block (2).

  Courtesy of BMW OF NORTH AMERICA, INC.