41 62 000 Removing And Installing Tailgate

Read contents of BODY, GENERAL .

Necessary preliminary tasks: 

• Remove PANEL FOR TAILGATE .
• Disconnect all cable plug connections and pull wiring harness out of tailgate.

Carry over the work step shown symmetrically to the other side of the vehicle.

Slacken screws (1) and remove tailgate with a second person.

Tightening torque: 41 62 1AZ .

Courtesy of BROWN, BOVERI & CO., LTD.

Installation note: 

Install tailgate at screw locations on hinge.

If necessary, ADJUST TRUNK LID .