41 61 000 Removing And Installing Engine Compartment Lid
IMPORTANT:
Danger of injury!
Use suitable tool to support bonnet in the fully opened position.
Removal of the engine compartment lid must be carried out with the assistance of a second person.
Use suitable tool to support bonnet in the fully opened position.
Removal of the engine compartment lid must be carried out with the assistance of a second person.
IMPORTANT:
These instructions apply only to vehicles without active pedestrian protection
!
Observe separate procedure for vehicles with active pedestrian protection!
Observe separate procedure for vehicles with active pedestrian protection!
Read contents of BODY, GENERAL .
Release the lock (1) and detach the water hose (2).
Unfasten plug connection (3) and disconnect.
Unscrew nuts (1).
Remove engine compartment lid.
Installation note:
Install engine compartment lid at screw locations to on hinge.
Tightening torque 41 61 1AZ .
If necessary, adjust engine compartment lid.