41 12 190 Replacing Left Luggage Compartment Base
Read contents of BODY, GENERAL .
Follow procedure for REPAIR STAGE 2 .
The following new body parts are required (see the applicable BMW parts catalogue):
Removal
Mark severance cut (1) next to reinforcement (2) and disconnect.
Open welded connections in area (3).
Open welded connections in area (1).
Open welded connections in area (1).
Remove luggage compartment floor.
NOTE:
Side wall and tail panel have been hidden for clarity.
New part preparation
Mark severance cut at luggage compartment floor in accordance with severance cut on vehicle + 15 mm extra material and cut (1).
Adjust luggage compartment floor in combination with side panel and tail panel to fit and secure.
Installation
Install new part and weld in area (1).
NOTE:
Side wall and tail panel have been hidden for clarity.
Weld new part in area (1).