61 31 321 Removing and installing radio and A/C control panel
Special tools required:
- 00 9 340
Attention!
Risk of damage!
A hard disk is installed in the Car Information Computer (CIC).
Carry out mechanical work on the CIC and adjacent components with care.
Avoid subjecting the CIC to vibration/shocks.
Attention!
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .
Attention!
Carry out installation in a dust-free workshop area only.
To avoid damage, do not touch or dirty the display area.
Necessary preliminary tasks:
Insert special tool 00 9 340 as illustrated.
Carefully lever out trim (1) towards front and unclip.
Unfasten plug connection (1) and disconnect.
Remove cover (2).
Release all screws (arrow).
Pull control panel (1) forwards slightly.
Unlock associated plug connections and disconnect.
Remove the control panel (1).