63 99 273 Replacing bulb for turn indicator, front left
IMPORTANT:
Follow instructions for handling light bulbs (EXTERIOR LIGHTS) .
Unlock and remove cover (1).
Turn bulb holder (1) in direction of arrow and remove from headlight (2).
IMPORTANT:
Risk of damage due to moisture penetration!
Installation note:
Check seal. Replace bulb holder (1) if necessary.
Comply with INSTRUCTIONS FOR REPLACING THE PROTECTIVE CAP .
Turn bulb holder (1) clockwise to limit position.
Bulb holder (1) must lock correctly.
21W version:
Pull bulb (1) in direction of arrow out of bulb holder (2).
Installation note:
Note BULB TYPE .
Type PY24W:
Turn bulb with socket (1) in direction of arrow and remove from bulb holder (2) toward the top.
Installation note:
Check that bulb with socket (1) and sealing ring (3) on bulb holder (2) are correctly seated.
Note BULB TYPE .