63 21 035 Removing and installing/replacing left socket housing for rear light (on tailgate)

Necessary preliminary tasks: 

• Partially removing TRIM FOR REAR LID

Unfasten plug connection (1) and disconnect.

Unlock latches (2) and remove socket housing (3) from rear light (4).

Installation note: 

Make sure plug connection (1) is correctly seated.

Catches (2) must not be damaged or missing.

Make sure socket housing (3) is correctly seated on rear light (4).

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carefully press down bulb (1), turn in direction of arrow and remove from socket housing (2).

Note BULB TYPE .

Courtesy of BMW OF NORTH AMERICA, INC.