Installing the DME control unit
- Slide the DME control unit (2) into the holder for the DME control unit and lock with the clamps (1) .
Follow-up works
- Refer to CONNECTING THE CONNECTOR WITH THE DME CONTROL UNIT AND THE POWER DISTRIBUTION BOX (PDM) .
- Refer to INSTALLING COVER FOR THE DME CONTROL UNIT .
- Refer to CONNECTING THE NEGATIVE BATTERY CABLE .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to IF THE DME CONTROL UNIT IS REPLACED .
- Refer to RESET ULTRA-SMALL QUANTITY ADAPTATION .