LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2017
>>
M240i 2D Convertible, Automatic Trans
>>
Repair and Diagnosis
>>
General Information
>>
OEM General Information
>>
General Orphan Data (2 Of 2)
>>
Installing intake silencer housing
Installing intake silencer housing
Thread in and install intake silencer housing
(3)
into the intake port (4).
Engage the intake filter housing
(3)
into the rubber mount.
Tighten clamp
(2)
.
TIGHTENING TORQUE SPECIFICATIONS
Clean air pipe to intake silencer housing
Clamp
3 Nm
Courtesy of BMW OF NORTH AMERICA, INC.
Connect the connector
(1)
and audibly lock it.
Courtesy of BMW OF NORTH AMERICA, INC.