LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> M240i 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Technical Data -- X2 (F39)) >> 31 Front Axle, Front-Wheel Guide Technical Data >> 3100 GENERAL FRONT AXLE TECHNICAL DATA (X2 xDrive 28i 2018-2022)

3100 GENERAL FRONT AXLE TECHNICAL DATA (X2 xDrive 28i 2018-2022)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
3100 TECHNICAL DATA OVERVIEW

Weight compensation for the removal of the eDrive motor 
  If the cargo area is empty:  120 kg
31 00 FRONT AXLE - RIDE HEIGHT F39 / FRONT - TECHNICAL DATA SPECIFICATION

Ride height in normal position
Attach tape measure to bottom middle of rim flange and measure to lower edge of wheel arch
Tolerance ride height in - NORMAL POSITION maximum 10 mm
- DESIGN POSITION maximum 2 mm
Difference ride height between left/right in - NORMAL POSITION 10 mm
- DESIGN POSITION 2 mm
Series    
17" wheel rim mm 646
18" wheel rim mm 659
19" wheel rim mm 671
20" wheel rim mm 684
Sports suspension settings with low-slung    
17" wheel rim mm 636
18" wheel rim mm 649
19" wheel rim mm 661
20" wheel rim mm 674
31 00 GENERAL - TRACK WIDTH / WHEELBASE F39 / FRONT - TECHNICAL DATA SPECIFICATION

Track width for normal position and rim offset (ET)
Standard suspension    
-Rim offset 39 mm 1589
- Rim offset 40 mm 1587
- Rim offset 47 mm 1573
- Rim offset 50 mm 1567
- Rim offset 51 mm 1565
- Rim offset 52 mm 1563
Sports suspension settings with low-slung    
-Rim offset 39 mm 1589
- Rim offset 40 mm 1587
- Rim offset 47 mm 1573
- Rim offset 50 mm 1567
- Rim offset 51 mm 1565
- Rim offset 52 mm 1563
Wheelbase mm 2670


31 00 FRONT AXLE - RIDE HEIGHT F39 / 4WD - TECHNICAL DATA SPECIFICATION

Ride height in normal position
Attach tape measure to bottom middle of rim flange and measure to lower edge of wheel arch
Tolerance ride height in - NORMAL POSITION maximum 10 mm
- DESIGN POSITION maximum 2 mm
Difference ride height between left/right in - NORMAL POSITION 10 mm
- DESIGN POSITION 2 mm
Series    
17" wheel rim mm 646
18" wheel rim mm 659
19" wheel rim mm 671
20" wheel rim mm 684
Sports suspension settings with low-slung    
17" wheel rim mm 636
18" wheel rim mm 649
19" wheel rim mm 661
20" wheel rim mm 674