1700 COOLING, TEST TECHNICAL DATA (X2 M35i 2019-2022)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
1700 TECHNICAL DATA OVERVIEW
| Coolant capacity in cooling system | ||
| B48A20O1, B48A20M1, B46A20M1 with manual transmission without auxiliary coolant radiator (up to 03/2018) | 6.55 l | |
| B48A20O1, B48A20M1, B46A20M1 with manual transmission without auxiliary coolant radiator (from 03/2018) | 6.75 l | |
| B48A20O1, B48A20M1, B46A20M1 with manual transmission with auxiliary coolant radiator (up to 03/2018) | 7.25 l | |
| B48A20O1, B48A20M1, B46A20M1 with manual transmission with auxiliary coolant radiator (from 03/2018) | 7.45 l | |
| B48A20M1, B46A20M1 with automatic transmission without auxiliary radiator (up to 03/2018) | 6.8 l | |
| B48A20M1, B46A20M1 with automatic transmission without auxiliary radiator (from 03/2018) | 7.0 l | |
| B48A20M1, B46A20M1 with automatic transmission with auxiliary radiator (up to 03/2018) | 7.5 l | |
| B48A20M1, B46A20M1 with automatic transmission with auxiliary radiator (from 03/2018) | 7.7 l | |
| B48A20M1, B46A20M1 with DCT without auxiliary radiator (up to 03/2018) | 6.9 l | |
| B48A20M1, B46A20M1 with DCT without auxiliary radiator (from 03/2018) | 7.1 l | |
| B48A20M1, B46A20M1 with DCT with auxiliary radiator (up to 03/2018) | 7.6 l | |
| B48A20M1, B46A20M1 with DCT with auxiliary radiator (from 03/2018) | 7.8 l | |
| B48A20O1, B46A20O1 with automatic transmission without auxiliary radiator | 6.9 l | |
| B48A20O1, B46A20O1 with automatic transmission with auxiliary radiator | 7.6 l | |
| Coolant level | ||
| Overfill quantity of coolant (above the maximum mark) in the high-temperature expansion tank | + 200 ml | |
| Overfill quantity of coolant (above the maximum mark) in the low-temperature expansion tank (if installed) | + 100 ml | |
| Opening pressure of the cooling system sealing cap/test pressure | ||
| Pressure relief valve opens when the pressure exceeds the ambient pressure . | min. 1.4 bar | |
| Electric changeover valve must open at latest when the pressure is lower than the ambient pressure | max. 0.1 bar | |
| Test pressure for cooling system (gauge pressure) | 1.5 bar | |
| Test conditions for coolant level | ||
| Coolant must be cooled down | ||
1700 TECHNICAL DATA OVERVIEW
| Coolant capacity in cooling system | ||
| B48A20T1 with automatic transmission and auxiliary coolant radiator | 10.8 l | |
| Coolant level | ||
| Overfill quantity of coolant (above the maximum mark) in the high-temperature expansion tank | + 200 ml | |
| Overfill quantity of coolant (above the maximum mark) in the low-temperature expansion tank (if installed) | + 100 ml | |
| Opening pressure of the cooling system sealing cap/test pressure | ||
| Pressure relief valve opens when the pressure exceeds the ambient pressure . | min. 1.4 bar | |
| Electric changeover valve must open at latest when the pressure is lower than the ambient pressure | max. 0.1 bar | |
| Test pressure for cooling system (gauge pressure) | 1.5 bar | |
| Test conditions for coolant level | ||
| Coolant must be cooled down | ||