Installing the mechanics for the panorama glass roof cover

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Insert the gate (1) correctly in the driver (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the gate (1) from the top.
When guiding the gate (1) in, the sliders (2) must be guided correctly into the rail (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Install the new slider (1) on the new mechanism (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Guide the mechanism (1) in area (A) into the rail (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Slide the mechanism (1) forward and guide the slider (2) into the rail (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Guide the guide (1) into the rail (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the mechanism (1) in area (A) into the gate (2).
Shift the mechanism (1) manually until the slider (3) is guided into the rail (4).

Courtesy of BMW OF NORTH AMERICA, INC.
If necessary, shift the mechanism manually until the opening for the guide (1) is open.
Insert the guide (1),
1. First, guide it into the back of the rail (2),
2. Next, clip it into the rail (2).
Courtesy of BMW OF NORTH AMERICA, INC.
Make sure that the guide (1) latches (2) correctly in the rail (3).
Shift the mechanism completely to the end in both directions hand force,
Check smooth and noise-free running of mechanism.

Courtesy of BMW OF NORTH AMERICA, INC.